Feel free to browse our blog ETeamZ Equipment. You will discover here the honest product review you have been looking for about Brute Bolt. If you enjoy our website, then please don"t forget to click an appreciation button below.
![]() 08 Kawasaki Brute Force 650 4x4 hardware set nuts & bolts US $49.00
|
Brute Bolt
Kingquad vs. Brute Force
If you are looking for a different item here are a list of related products on ETeamZ Equipment, please check out the following:
Frequently Asked Questions...
How can i remove a stuck engine bolt?
I have a suzuki gs250t as a restoration project and there is a engine bolt stuck near to the starter motor, and i cant get the bugger out. I've tried using heat, ive tried WD40, and i made the mistake of letting someone i know have a go at brute force, which resulted in the bolt rounding off and have abit chipping off, so can you give any advice on how i can get it out because it is holding up the project a bit
Answer:
I have had similar problems in the past. Here are two methods that ive used:
1. An easy out. you drill a hole about a half inch into the bolt. An easy out has reverse threads on it and will grab when you place it in the hole you drilled in the bolt. as you turn counter clock wise it will sink into the bolt and grab usually releasing the stuck bolt. Any parts house should have an assortment of easy outs and the correct drill bit to tap the center of the bolt
2. I have also had to take a dremmell tool with a small grinder wheel and cut a slot in the top of the bolt and take a BIG HONKIN screwdriver and use a pipe wrench on the screwdriver handle for leverage.
good luck I hope one of thees methods works for you

































